濟南卷簾門廠家表示，使用一年以上的卷簾門應進行檢查和維護，在日常生活中應更加注意卷簾門的維護和保養。以下是卷簾門維護的相關方法:

The manufacturer of Roller shutter in Jinan said that Roller shutter used for more than one year should be inspected and maintained, and more attention should be paid to the maintenance of Roller shutter in daily life. The following are relevant methods for maintenance of Roller shutter:

一：卷簾門裝置

1： Roller shutter safety device

快門系統是除剎車系統外的安裝保護裝置，在門軌道左右下方25厘米處或底部安裝氣動裝置。當門關閉時，如果車輛和行人經過，快門會自動停止，然后向上運行，直到完全打開。當光電和氣囊出現故障時，應及時修理或更換；如果門在向下運行過程中沒有及時更換，很容易對行人和車輛造成傷害。

The shutter safety system is a protective device installed in addition to the brake system, and a pneumatic safety device is installed 25 centimeters below or at the bottom of the door track. When the door is closed, if vehicles and pedestrians pass by, the shutter will automatically stop and then run upwards until it is fully opened. When the safety optoelectronics and safety airbags fail, they should be repaired or replaced in a timely manner; If the door is not replaced in a timely manner during downward movement, it is easy to cause harm to pedestrians and vehicles.

二、動力和制動系統

2、 Power and braking system

電機的動力和制動系統是整個快速門產品的關鍵部件，是整個快速門穩定運行的保證。當制動系統出現故障時，應及時修理和更換；

The power and braking system of the motor are key components of the entire fast door product, ensuring the safe and stable operation of the entire fast door. When the braking system malfunctions, it should be repaired and replaced in a timely manner;

比如；剎車不靈敏，剎車后門繼續下滑，剎車時聲音很大，門啟動時會有間隙停頓等。如果上述故障發生，如果不及時維護和更換，如果不按照警告執行，可能會導致門體突然下落、電機損壞或其他部件損壞，并可能造成人身傷害。

For example; The brakes are not sensitive, the rear door of the brake continues to slide, the sound is loud when braking, and there may be gaps or pauses when the door is activated. If the above faults occur, if not maintained and replaced in a timely manner, and if not executed according to the warning, it may cause the door body to suddenly fall, the motor to be damaged, or other components to be damaged, and may cause personal injury.

三、控制開關系統

3、 Control switch system

控制開關系統是快速門的主要部件，如輸出、關閉、信號轉換、編程等。分為集成電路板控制芯片和電氣元件，電子元件對使用環境要求較高。為了保證快速門的運行，在日常使用過程中應經常對產品進行維護，控制系統出現故障時應及時更換和維護；

The control switch system is the main component of the fast door, such as output, closing, signal conversion, programming, etc. Divided into integrated circuit board control chips and electrical components, electronic components have high requirements for the usage environment. In order to ensure the safe operation of the fast door, the product should be regularly maintained during daily use, and the control system should be replaced and maintained in a timely manner when there is a malfunction;

四：其它

4： Other

如鋼結構、抗風裝置、密封裝置、門體結構、互鎖裝置、急停裝置、滾筒滾筒、限位裝置、開關裝置等。都是不可分割的系統，保證系統的正常運行和日常維護非常重要。

Such as steel structure, wind resistance device, sealing device, door structure, interlocking device, emergency stop device, drum drum, limit device, switch device, etc. Both are inseparable systems, ensuring the normal operation and daily maintenance of the system is very important.

卷簾門維護的相關方法就講解到這里了，希望您看完之后對卷簾門的使用更加順利，還有什么疑惑或者會需求，可以隨時來我們網站http://www.santoncc.cn進行咨詢！

So far are the maintenance methods of Roller shutter. I hope you can use Roller shutter more smoothly after reading it. If you have any doubts or needs, you can come to our website at any time http://www.santoncc.cn Consulting!