車庫門是新房主和家庭裝修者的主要選擇，由于多種原因，車庫門正處于普及的高峰期。那么車庫門運行的檢查與測試方法是怎樣的呢？下面就讓濟南卷簾門廠家為您解答吧。

Garage door is the main choice of new homeowners and family decorators. Due to various reasons, garage door is at the peak of popularity. What are the inspection and testing methods for garage door operation? Now let Jinan roller shutter door manufacturer answer for you.

如果你的車庫門此時運行良好，你可以通過簡單的檢查和維護程序使其長期保持這種狀態，這些技巧也可以修復車庫門剛剛出現的問題和故障。

If your garage door works well at this time, you can keep it in this state for a long time through simple inspection and maintenance procedures, and these skills can also repair the problems and faults just occurred in the garage door.

檢查濟南車庫門上的滾輪和軌道：如果你不記得清潔它們是什么時候，是時候用刷子清潔下滾輪和軌道，并潤滑下滾輪支架和軸承。滾子上的軸承也會磨損，并更換任何運行不穩定的滾子。

Check the rollers and rails on the garage door in Jinan: If you don't remember when to clean them, it is time to clean the lower rollers and rails with a brush, and lubricate the lower roller bracket and bearings. The bearings on the rollers will also wear out and replace any unstable rollers.

緊固件擰緊：高架車庫門上的導向滾輪軌道是分段組裝的，所以各部件應完好，支架的螺釘和螺栓應擰緊。

Fastener tightening: the guide roller track on the overhead garage door is assembled in sections, so all components should be intact, and the screws and bolts of the bracket should be tightened.

檢查鋼絲繩和線圈：旋轉操作的車庫門鋼絲繩和線圈會隨著時間的推移而磨損，磨損的鋼絲繩和損壞的線圈需要更換。

Check the wire rope and coil: the wire rope and coil of the garage door operated by rotation will be worn over time, and the worn wire rope and damaged coil need to be replaced.

測試車門平衡：車庫門只需幾磅壓力就能上下移動。如果扭簧磨損并失去彈性，電動車庫門開啟器可能需要額外的力來將門抬起。這樣會造成車庫門電機磨損快，建議盡快更換扭簧。

Test the door balance: The garage door can move up and down with only a few pounds of pressure. If the torsion spring is worn and loses elasticity, the electric garage door opener may require additional force to lift the door. This will cause the garage door motor to wear quickly. It is recommended to replace the torsion spring as soon as possible.

測試電機的自動轉動功能：車庫門電機的設計是為了在門下降到地面時遇到障礙物時，可以自動反轉并提起門。如果此功能不再正常工作，厚重的門會帶來隱患，應修理或更換電機。

Test the automatic rotation function of the motor: The garage door motor is designed to automatically reverse and lift the door when it encounters obstacles when it descends to the ground. If this function no longer works normally, the thick door will bring hidden danger, and the motor should be repaired or replaced.

關于車庫門運行的檢查與測試方法，上述內容中已經為大家詳細的總結完了，相信大家看完之后會對此有新的認識和了解，如若想要了解更多的內容，可以多多關注我們的網站http://www.santoncc.cn。

As for the inspection and test methods of garage door operation, the above contents have been summarized in detail for you. I believe you will have new understanding and understanding after reading it. If you want to know more, you can pay more attention to our website http://www.santoncc.cn 。