卷簾門在我們生活中隨處可見，然而你知道是什么讓卷簾門能夠上下拉動上萬次嗎?今天我們就來見識見識濟南卷簾門的卷軸是怎么生產的，小編為您解說下吧。

Rolling shutter doors can be seen everywhere in our life, but do you know what makes rolling shutter doors can be pulled up and down thousands of times? Today, let's see how the scroll of Jinan roller shutter door is produced. Let's explain it for you.

卷軸作為卷簾門的核心部件，它的質量將直接決定卷簾門的使用壽命。而卷軸的結構很簡單，一般都是由彈簧和和卷軸共同組成。

As the core component of roller shutter door, its quality will directly determine the service life of roller shutter door. The structure of the reel is very simple, which is generally composed of a spring and a reel.

在生產卷軸時主要的工作就是卷彈簧，卷軸上的彈簧都是用彈簧鋼片卷曲而成的，所以在卷彈簧的時候就需要用到彈簧卷料機。彈簧卷料機的結構也非常簡單，主要就是一個轉軸。

The main work in the production of the reel is to roll the spring. The springs on the reel are all rolled with spring steel sheets, so the spring coiler is needed when rolling the spring. The structure of the spring coiler is also very simple, mainly a rotating shaft.

機箱在使用時直接把鋼制轉軸用螺栓固定在機箱上，耳鋼制轉軸上穿著幾個彈簧，和另一端則是用鐵架子把轉軸架起來，把彈簧和分開一定距離之后就可以開始上彈簧鋼片了，直接把彈簧鋼片用螺絲固定在轉軸上。

When the chassis is in use, the steel rotating shaft is directly fixed on the chassis with bolts. Several springs are worn on the ear steel rotating shaft, and the rotating shaft is supported with an iron frame at the other end. After the spring and the spring are separated for a certain distance, the spring steel sheet can be installed, and the spring steel sheet can be directly fixed on the rotating shaft with screws.

而彈簧卷料機上的鉤子則是用來拉住彈簧和的，在啟動卷料機之前，還要在彈簧鋼片上抹上一點潤滑油，卷料機一起動，帶著轉軸一起旋轉，彈簧鋼片很快就被卷起來了，后用鋼筋固定就可以了。

The hook on the spring coiler is used to pull the spring and the spring. Before starting the coiler, a little lubricating oil should be applied to the spring steel sheet. Once the coiler starts, it rotates with the shaft, and the spring steel sheet is quickly rolled up and then fixed with steel bars.

此外定期驗收電動卷簾門上下開關、在行程控制器上加一些潤滑劑、確保正常、良好的操作。此外、操作者手動控制卷簾、驗收運行狀態、并校準上下行程開關的位置、以確保電動卷簾在打開或關閉時處于適當的位置。

In addition, regularly check and accept the up and down switches of the electric roller shutter door, and add some lubricant to the travel controller to ensure normal and good operation. In addition, the operator manually controls the roller shutter, accepts the operation status, and calibrates the position of the up and down travel switches to ensure that the electric roller shutter is in the proper position when it is opened or closed.

在驗收過程中、防止電動卷簾門頂部、底部或反轉、并且發生緊急情況。要立即暫停旋轉、請斷開電源。更多注意事項就來我們網站http://www.santoncc.cn咨詢了解吧。

During the acceptance process, prevent the top, bottom or reverse rotation of the electric roller shutter door and emergency. To suspend rotation immediately, disconnect the power supply. More notes on our website http://www.santoncc.cn Ask and understand.