Rolling shutter door is one of the categories in the market. It is suitable for garages, hospitals, commercial facade, factories and mines, shopping malls, enterprises and other public places or residential buildings, especially where the door opening is large and it is inconvenient to install the ground door body. So, what are the requirements of rolling shutter door for power supply?

對于像或者寫 字 樓等出人人流較多的場所，其自動門的傳感器宜采用徽波傳感器，對于出人人流較少，探測對象為靜止或運動體的場所，其自動門的傳感器宜采用紅外傳感器或超 聲 波 傳感器。

For places like shopping malls or office buildings where people flow more, the sensor of the automatic door should be a wave sensor. For places where people flow less and the detection object is static or moving, the sensor of the automatic door should be an infrared sensor or an ultrasonic sensor.

如果是用于室外的電動大門的配電線路，好是裝設剩余電流動作保護器，自動門和卷簾門配件的所有金屬構件及附屬電氣設備的外陣可導電部分均應可靠接地，傳拍系統的巡視通道海隔20-30m或在連鎖機械旁應設置事故斷電開關或自鎖式按鈕。

If the power distribution line is used for outdoor electric door, it is better to install residual current operated protector. All metal components of automatic door and rolling shutter door accessories and the external conductive parts of auxiliary electrical equipment shall be reliably grounded. The patrol channel of the transmission system shall be 20-30m away from sea or the emergency power-off switch or self-locking button shall be set beside the interlocking machinery.

同一傳輸系統的電氣設備，宜由同一電源供電。當傳愉系統很長時，可按工藝分成多段，井由同一電源的多個回路供電，當主回路和控制回路由不同線路或不同電敵供電時，應設有連鎖裝置。

The electrical equipment of the same transmission system should be powered by the same power supply. When the transmission system is very long, it can be divided into several sections according to the process. The well is powered by multiple circuits of the same power supply. When the main circuit and control circuit are powered by different lines or different electric enemies, interlocking device shall be set.

接下來濟南卷簾門在這里簡單了解一下卷簾門配件在配電方面的五個要求吧!

Next, Jinan roller shutter door here a simple understanding of the roller shutter door accessories in the five requirements of power distribution!

1、對于像或者寫 字 樓等出人人流較多的場所，其自動門的傳感器宜采用徽波傳感器。對于出人人流較少，探測對象為靜止或運動體的場所，其自動門的傳感器宜采用紅外傳感器或超 聲 波傳感器。

1. For places like shopping malls or office buildings where people flow more, the sensor of the automatic door should be Huibo sensor. For the place with few people and the detection object is static or moving object, the sensor of automatic door should be infrared sensor or ultrasonic sensor.

2、如果是用于室外的電動大門的配電線路，好是裝設剩余電流動作保護器。

2. If it is used for outdoor electric gate distribution line, it is good to install residual current action protector.

3、另外，自動門和卷簾門配件的所有金屬構件及附屬電氣設備的外陣可導電部分均應可靠接地。

3. In addition, all metal components of automatic door and rolling shutter accessories and external conductive parts of auxiliary electrical equipment shall be reliably grounded.

4、再而，傳拍系統的巡視通道海隔20-30m或在連鎖機械旁應設置事故斷電開關或自鎖式按鈕。

4. Moreover, the patrol channel of the shooting system should be 20-30m away from the sea or set with an emergency power-off switch or self-locking button beside the interlocking machinery.

5、后注意，同一傳愉系統的電氣設備，宜由同一電源供電，當傳愉系統很長時，可按工藝分成多段，井由同一電源的多個回路供電，當主回路和控制回路由不同線路或不同電敵供電時，應設有連鎖裝置。

5. It should be noted that the electrical equipment of the same transmission system should be powered by the same power supply. When the transmission system is long, it can be divided into multiple sections according to the process. The well is powered by multiple circuits of the same power supply. When the main circuit and control circuit are powered by different lines or different enemies, interlocking devices should be set.